7 Deadlift Progressions to Build Serious Strength Whatever Your Level – Go from Beginner to Heavy Lifter

The deadlift is somewhat of an anomaly in the weightlifting world.

It’s often lauded as the king of all lifts, while at the same time being decried as one of the most dangerous, injurious things you can ever do with a barbell.

Sadly for the sensationalists, neither is strictly true. But the reasoning behind both claims is probably the same.

It’s one of the barbell movements that allows you to lift the most weight humanly possible. Which is why it’s an awesome tool for building strength, and also why, when things go wrong, the consequences can be significant.

If you’re new to the gym and want a taste of pulling heavy loads from the floor, but aren’t sure where to start, these seven progressions will take you from lightweight beginner to certified powerlifter.

Ensure that you’ve nailed each one before you progress onwards. You should be able to control each rep, maintain tension throughout your whole body and move loads under a controlled tempo, without being folded up like a pretzel.

What to read next

And look, there’s nothing wrong with jumping straight to the finish line and learning with the barbell itself. Many gym-goers, if not most, do this and are absolutely fine.

But if you’re looking for a crash course in the deadlift, this is it.

1. Wall-Assisted Goblet Deadlift

We’re starting with a single dumbbell and a wall. Nothing fancy, but this simple variation will teach you one of the most important skills in deadlifting: the hip hinge.

  • Stand around 12 inches away from a wall, facing away from it, with your feet slightly wider than shoulder-width apart. Hold a dumbbell vertically in front of your body, gripping the top end of the weight with both hands, as you would for a goblet squat.
  • With a slight bend in your knees, begin pushing your bum backwards towards the wall, allowing your torso to hinge forwards as the dumbbell lowers between your legs. Keep your trunk braced and your spine relatively neutral throughout.
  • The wall acts as a cue, encouraging you to push your hips backwards rather than simply bending through your lower back. You should feel tension building through your hamstrings as you descend.
  • Once your bum touches the wall, drive your feet into the ground and push your hips forwards to stand tall.

The goblet position also limits how far you need to lower the weight, meaning you’re not forced into a range of motion you may not yet have the mobility to control.

Master this movement before moving on.

2. Kettlebell Deadlift

man demonstrating kettlebell deadlift exercise.

Next, we’re taking that hip hinge away from the wall and introducing a proper deadlift from the floor.

Kettlebells are ideal here because their handle sits slightly higher off the ground than dumbbells, reducing the range of motion and allowing you to focus on pushing your hips backwards, loading your hamstrings and maintaining good form.

  • Stand with your feet around shoulder-width apart and a pair of kettlebells either side of your feet. Push your hips backwards, hinging forwards, and bend your knees just enough to reach down and grip the handles with both hands.
  • Breathe in, create tension through your trunk, pull your shoulders back and down, and ensure your arms aren’t bent before driving your feet into the floor and standing upright.
  • Keep the kettlebells close to your body throughout, finishing with your glutes squeezed and your hips fully extended. Reverse the movement under control, pushing your bum backwards as you lower the weight.

You can absolutely use dumbbells here instead. If you find yourself having to round your lower back excessively to reach the weights, simply elevate them on blocks.

3. Dumbbell Deadlift

db dumbbell deadlift

Once you’ve mastered the kettlebell, a pair of dumbbells can introduce a slightly greater range of motion, requiring more mobility and control while allowing you to gradually increase the load.

  • Stand with your feet hip-width apart, holding a dumbbell in each hand at your sides. Keeping your core braced and your knees slightly bent, push your hips backwards and lower the weights towards the floor.
  • Allow your knees to bend further as necessary, keeping the dumbbells close to your legs and your back in a strong, controlled position.
  • Lower as far as your mobility allows without losing tension or control, before driving through your feet to return to standing.

Depending on the size of your dumbbells, you may find yourself travelling through a greater range of motion than you did with the kettlebell. That’s the point. We’re gradually increasing the demands on your body, rather than throwing you straight into the deep end.

trap bar deadlift

Now we’re getting serious.

Not every gym has a trap bar, but if yours does, it’s an incredibly useful tool for progressing towards heavier lifting. In fact, you could comfortably use the trap bar for the rest of your lifting career and never need to graduate to a straight barbell.

Unlike a conventional deadlift, where the bar sits in front of your shins, a trap bar positions the load around your body, with your hands in a neutral position at your sides.

This changes the mechanics of the lift, generally allowing for a more upright torso and greater contribution from your quads. For many lifters, it also makes finding a comfortable, strong starting position easier.

  • Step inside the trap bar, positioning your feet around hip-width apart. Push your hips backwards and bend your knees to reach the handles, keeping your chest proud and your core braced.
  • Create tension through your arms, back and torso, then drive the floor away, extending your knees and hips together until you’re standing tall.
  • Lower the weight under control, reversing the movement and keeping your entire body tight.

This is where you can really begin adding some serious load. Just remember, the goal isn’t simply to lift more weight – it’s to lift more weight while maintaining the same control you’ve been practising since those first wall-assisted reps.

sumo deadlift

This might be a controversial entry, but hear us out.

The sumo deadlift uses a wider stance than its conventional counterpart, with your hands gripping the bar inside your legs. For many lifters, this allows for a more upright torso and less forward lean, which can make maintaining a strong spinal position under heavy loads easier.

That’s not to say that spinal flexion is inherently dangerous, or that sumo deadlifts are universally safer. But as a stepping stone towards heavy conventional pulling, they can be a useful way to introduce the demands of a fully loaded barbell.

  • Stand with your feet wider than shoulder-width apart, toes turned slightly outwards and the bar positioned over the middle of your feet.
  • Push your knees out in line with your toes as you lower your hips and reach down to grip the bar with both hands inside your legs.
  • Brace your core, engage your lats and pull the slack out of the bar before driving your feet into the ground, extending your knees and hips to stand upright.
  • Keep the bar close to your body throughout, avoiding the temptation to throw your shoulders backwards at the top.

The aim here is to become comfortable with the heavy, full-body loading that barbell deadlifting brings, while using a position that may allow you to keep your torso more upright.

We’re returning to that hip hinge we first practised against the wall, only this time we’re introducing a loaded barbell and a much greater emphasis on controlling the lowering phase.

  • Set a barbell in a rack at around mid-thigh height. Grip the bar, unrack it and take a few steps backwards.
  • With your feet around hip-width apart and your knees slightly bent, brace your core and begin pushing your bum backwards, allowing the bar to travel down your thighs.
  • Think all the way back to those very first wall-assisted reps. We’re trying to load the hamstrings by pushing the hips backwards, rather than simply bending forwards through the spine.
  • Keep the bar close to your legs and lower slowly, stopping when you feel a substantial stretch through your hamstrings, or when you can no longer maintain a strong, controlled position.
  • For some lifters, that might mean lowering the bar almost to the floor. For others, it might be just below the knees. Both are absolutely fine.
  • From here, drive your hips forwards and squeeze your glutes to return to standing.

The Romanian deadlift is particularly useful for building strength through the posterior chain and teaching you to maintain full-body tension under load.

Don’t rush the lowering phase. Control is the name of the game here.

7. Conventional Barbell Deadlift

barbell deadlift

And finally, we’ve arrived.

By now, you should have developed a strong hip hinge, improved your ability to maintain full-body tension and become comfortable moving increasingly heavy loads.

It’s time to put it all together.

  • Stand with your feet around hip-width apart, the barbell positioned over the middle of your feet. Push your hips backwards and bend your knees to reach down and grip the bar just outside your legs.
  • Your shins should come forwards to meet the bar, with the bar remaining over your midfoot. Unlike the Romanian deadlift, we’re now deliberately introducing more knee bend and quad drive into the movement.
  • Brace your core hard, engage your lats and pull the slack out of the bar, creating tension throughout your entire body before the weight even leaves the floor.
  • Now, rather than simply thinking about pulling the bar upwards, focus on pushing the floor away.
  • Your hips and shoulders should rise together as the bar leaves the ground. Avoid letting your hips shoot upwards first, turning the movement into a stiff-legged pull.
  • Keep the bar close to your body, extending your knees and hips together until you’re standing tall, with your glutes contracted.
  • Reverse the movement under control, pushing your hips backwards before bending your knees to return the bar to the floor.
  • Reset your position, rebrace and repeat.

And remember, just because you’ve reached the conventional deadlift doesn’t mean you need to abandon everything that came before it. Each of these variations has its own benefits, and all of them can continue to earn their place in your training as you work towards bigger, stronger lifts.


Author: Health Watch Minute

Health Watch Minute Provides the latest health information, from around the globe.

Leave a Reply

Your email address will not be published. Required fields are marked *